SURFACE PREPARATION

New surface to be cured 28 days before painting and free from all waterproofing issues. Prepare the surface by using suitable sand/emery paper or scrapping tools to remove dirt, dust, grease, loose flaking paint, laitance, algae, fungi etc. and wipe it clean.

•   Primer
Apply coat of Wembley Wall Primer Interior as per recommendation. Allow it to dry for 3-4 hrs or apply one more coat of Wembley Wall Primer Interior Primer as per recommendation. Allow it to dry 3-4 hrs.

•   Putty (if required)
Level the surface with Wembley Extra Smooth Wall putty interior and allow it to dry for 2-3 hrs. Sand surface with 180/320 emery paper and wipe it clean. Apply an additional coat depending upon the surface conditions and smoothen the surface.

•   Top Coat
Stain Free Matt Emulsion with potable water, 30% to 40% by weight . Apply 2-3 coats of Stain Free Matt Emulsion with an interval of 3-4 hrs. Application can be done by brush, roller or spray. For dark shades require additional coats for better hiding and appearance with potable water, 30% to 40% by weight.

•   Application Surfaces
All kind of well-prepared interior plasters, concrete and masonry surfaces.

PRECAUTIONS

• Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs. of application
• Do not apply when humidity is greater than 90%. It may cause prolonged drying time of paint and moisture condensation on the walls
• Do not over-thin or over-extend the brush
• Stir well and strain before use
• Tinted shades need thorough shaking immediately after colorants addition as well as before use
• For best performance, ensure that the surface is dry
• On moisture meter, the reading should be below 16%
• In case it is above that, find out the source of water and address it before painting

SAFETY MEASURES

• Kindly refer to the MSDS for detailed information on safety measures while handling the paint, which is available on request
• Store the container with the lid tightly closed in an upright position, in a cool, dry place
• Keep out of reach of children and away from eatables. May be harmful, if swallowed. In case of ingestion seek immediate medical attention
• Wear eye protection during application
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
• In case of skin contact, immediately wash skin with soap and plenty of water
• Get medical attention if irritation develops or persists
• Do not breathe vapor or spray
• It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalation.
• Left-over material/drums should not be disposed in soil/drains
• Consumers should consult a local recycling agency for proper disposal of paint/drum. In the event of spills, contain spillage using sand or earth.
• No added Lead, Mercury or Chromium compounds